Merge pull request 'Don't call python3.8, but python.' (#6) from feature/fix-python into master

Reviewed-on: #6

ddos-mitigator.conf

@@ -0,0 +1,30 @@
+# Example configuration file for ddos-mitigator.sh.
+# PLEASE TAKE CARE not to put any whitespace around the '=' signs, as this file is directly sourced by the script
+# file and this needs to conform to the BASH syntax. Also, make sure to declare the COUNTRIES variable with the
+# correct array syntax: COUNTRIES=("AA" "BB" "CC"), or to comment it out altogether.
+
+# The path to the GeoIP2 database file (must be either country or city database). This parameter is mandatory. If it is
+# not specified here, it must be given on the command line (through the -d option).
+DATABASE_FILE="/path/to/geoip/country-or-city-database.mmdb"
+
+# Enable the autopilot for automatically banning IP addresses of the desired countries (see also COUNTRIES option).
+# Only ban IP addresses with at least AUTOPILOT current connections. If the value is not specified or 0, don't
+# automatically ban IP addresses, but run in interactive mode.
+AUTOPILOT="0"
+
+# Defines the subnet size in bytes to be analyzed. Valid values are:
+# -  8 for class A networks (X.0.0.0/8)
+# - 16 for class B networks (X.X.0.0/16)
+# - 24 for class C networks (X.X.X.0/24)
+# - 32 for class D networks (X.X.X.X/32)
+# If not specified, run in interactive mode and prompt for the netmask size.
+NETMASK="8"
+
+# The country-codes to block as an array. Defaults to "CN" (China).
+#COUNTRIES=("CN" "HK" "TW")
+
+# Specify the JAIL to use for banning the IP addresses. Defaults to 'apache-auth'.
+#JAIL="apache-auth"
+
+# The desired port to monitor. Defaults to 443 (https).
+#PORT="443"

ddos-mitigator.sh

@@ -32,10 +32,7 @@
 #                                                                              #
 ################################################################################
 
-# Set the host's own IP address. So far, only an IPv4 address is supported.
-MY_IP="94.199.214.20"
-
-# After this point, no editing is required.
+# Store the start time; this enables us to output the total runtime at the end.
 start="$(date +%s)"
 
 # Dependencies of this script. Simple array with the following structure:
@@ -139,6 +136,13 @@ Usage: $(basename $0) -d FILE [OPTION...]
                                       printed to stderr and the program
                                       terminates with exit code 1.
 
+  -f, --config-file=FILENAME          Specify the full path to the configuration
+                                      file. If omitted, all options are read
+                                      from the command line.
+                                      Any parameter specified on the command
+                                      line takes precedence over configuration
+                                      option read from the file.
+
   -j, --jail=JAIL                     Specify the JAIL to use for banning the IP
                                       addresses.
                                       Defaults to 'apache-auth'.
@@ -194,8 +198,48 @@ function filter() {
 	mv "${filtered}" "${file}"
 }
 
+function set_default_values() {
+	if [[ -z "${autopilot}" ]]; then
+		autopilot=0
+	fi
+	if [[ -z "${bancountries}" ]]; then
+		bancountries=("CN")
+	fi
+	if [[ -z "${jail}" ]]; then
+		jail="apache-auth"
+	fi
+	if [[ -z "${netmask}" ]]; then
+		netmask=0
+	fi
+	if [[ -z "${port}" ]]; then
+		port=443
+	fi
+}
+
+function parse_config_file() {
+	source "${configfile}"
+	if [[ -z "${autopilot}" ]]; then
+		autopilot="${AUTOPILOT}"
+	fi
+	if [[ -z "${bancountries}" ]]; then
+		bancountries=(${COUNTRIES[@]})
+	fi
+	if [[ -z "${database}" ]]; then
+		database="${DATABASE_FILE}"
+	fi
+	if [[ -z "${jail}" ]]; then
+		jail="${JAIL}"
+	fi
+	if [[ -z "${netmask}" ]]; then
+		netmask="${NETMASK}"
+	fi
+	if [[ -z "${port}" ]]; then
+		port="${PORT}"
+	fi
+}
+
 function parse_command_line_args() {
-	TEMP=$(getopt -o 'a::,c:,d:,e,j:,n:,p:,h' -l 'auto::,country:,database:,dependencies,jail:,netmask:,port:,help' -- "$@")
+	TEMP=$(getopt -o 'a::,c:,d:,e,f:,j:,n:,p:,h' -l 'auto::,country:,database:,dependencies,config-file:,jail:,netmask:,port:,help' -- "$@")
 
 	if [ $? -ne 0 ]; then
 		echo 'Error parsing command line options. Terminating. Invoke with --help for help.' >&2
@@ -212,10 +256,6 @@ function parse_command_line_args() {
 			'')
 				autopilot=1
 				;;
-			*[!0-9]*)
-				echo "Invalid argument for parameter 'auto': '${2}'. Invoke with --help for help." >&2
-				exit 1
-				;;
 			*)
 				autopilot="$2"
 				;;
@@ -224,10 +264,6 @@ function parse_command_line_args() {
 			;;
 		'-c' | '--country')
 			IFS=',' read -ra bancountries <<<"${2}"
-			if [[ -z ${bancountries[@]// /} ]]; then
-				echo "Invalid argument for parameter 'country': '${2}'. Invoke with --help for help." >&2
-				exit 1
-			fi
 			shift
 			;;
 		'-d' | '--database')
@@ -238,27 +274,30 @@ function parse_command_line_args() {
 			check_dependencies
 			exit $?
 			;;
+		'-f' | '--config-file')
+			configfile="${2}"
+			shift
+			;;
 		'-j' | '--jail')
 			jail="${2}"
 			shift
 			;;
 		'-n' | '--netmask')
 			case "${2}" in
-			'1' | '8')
+			'1')
 				netmask=8
 				;;
-			'2' | '16')
+			'2')
 				netmask=16
 				;;
-			'3' | '24')
+			'3')
 				netmask=24
 				;;
-			'4' | '32')
+			'4')
 				netmask=32
 				;;
 			*)
-				echo "Invalid argument for parameter 'netmask': '${2}'. Invoke with --help for help." >&2
-				exit 1
+				netmask="${2}"
 				;;
 			esac
 			shift
@@ -283,15 +322,81 @@ function parse_command_line_args() {
 		shift
 	done
 
+	# If the config file option is set, parse the config file.
+	if [[ ! -z ${configfile+x} ]]; then
+		if [[ ! -f "${configfile}" || ! -r "${configfile}" ]]; then
+			echo "Can not read configuration file '${2}'. Invoke with --help for help." >&2
+			exit 1
+		fi
+
+		parse_config_file
+	fi
+
+	# Here, we set the default values for all options that have not been set yet.
+	set_default_values
+}
+
+function validate_parameter_values() {
+	# GeoIP-Database
 	if [[ -z "${database}" ]]; then
 		echo "No GeoIP database specified. Invoke with --help for more information." >&2
 		exit 1
 	fi
 
-	if [[ ! -r "${database}" ]]; then
+	if [[ ! -f "${database}" || ! -r "${database}" ]]; then
 		echo "Database '${database}' is not accessible." >&2
 		exit 1
 	fi
+
+	# Autopilot
+	case "${autopilot}" in
+	*[!0-9]*)
+		echo "Invalid value for parameter 'auto' / 'AUTOPILOT': '${autopilot}'." >&2
+		echo "Invoke with --help for help." >&2
+		exit 1
+		;;
+	esac
+
+	# Countries
+	if [[ -z ${bancountries[@]// /} ]]; then
+		echo "Invalid value for parameter 'country' / 'COUNTRIES': '${bancountries[*]}'." >&2
+		echo "Invoke with --help for help." >&2
+		exit 1
+	fi
+
+	# Jail
+	if [[ -z "${jail}" ]]; then
+		echo "Invalid value for parameter 'jail' / 'JAIL': '${jail}'." >&2
+		echo "Invoke with --help for help." >&2
+		exit 1
+	fi
+
+	# Netmask
+	case "${netmask}" in
+	'0' | '8' | '16' | '24' | '32')
+		# Everything OK.
+		;;
+	*)
+		echo "Invalid value for parameter 'netmask': '${2}'." >&2
+		echo "Invoke with --help for help." >&2
+		exit 1
+		;;
+	esac
+
+	# Port
+	case "${port}" in
+	*[!0-9]*)
+		echo "Invalid value for parameter 'port' / 'PORT': '${autopilot}'." >&2
+		echo "Invoke with --help for help." >&2
+		exit 1
+		;;
+	esac
+	if [[ ${port} -lt 0 || ${port} -gt 65535 ]]; then
+		echo "Invalid value for parameter 'port' / 'PORT': '${autopilot}'." >&2
+		echo "Value must be between 0 ... 65535 (inclusive)." >&2
+		echo "Invoke with --help for help." >&2
+		exit 1
+	fi
 }
 
 ################################################################################
@@ -444,14 +549,15 @@ banlist="${tmpdir}/banlist.txt"
 touch "${banlist}"
 
 # Parse the command line options
-autopilot=0
-netmask=0
-jail="apache-auth"
-bancountries=("CN")
+autopilot=
+netmask=
+jail=
+bancountries=
 database=
-port=443
+port=
 
 parse_command_line_args "$@"
+validate_parameter_values
 
 check_dependencies
 dependencies_ok=$?

geoip-lookup.py

@@ -1,16 +1,24 @@
-#!/usr/bin/python3.8
+#!/usr/bin/python
 
-import getopt
+import argparse
 import sys
 
 try:
     import geoip2.database
+    import geoip2.errors
 except ImportError:
     print(
-        "Required module geoip2.database not found. On Gentoo Linux, please install dev-python/geoip2 from the 'fritteli' overlay.",
+        "Required modules geoip2.database and geoip2.errors not found. On Gentoo Linux, please install dev-python/geoip2 from the 'fritteli' overlay.",
         file=sys.stderr)
     exit(1)
 
+try:
+    import maxminddb.errors
+except ImportError:
+    print(
+        "Required module maxminddb.errors not found. On Gentoo Linux, please install dev-python/maxminddb from the 'fritteli' overlay.",
+        file=sys.stderr)
+    exit(1)
 
 class LookupException(Exception):
     """
@@ -47,6 +55,14 @@ def get_county_code(ipaddress, dbfile):
             raise LookupException("Unsupported DB type: " + dbtype)
 
         return country.iso_code
+    except FileNotFoundError as e:
+        raise LookupException(e.args)
+    except maxminddb.errors.InvalidDatabaseError as e:
+        raise LookupException(e.args)
+    except geoip2.errors.AddressNotFoundError as e:
+        raise LookupException(e.args)
+    except ValueError as e:
+        raise LookupException(e.args)
     finally:
         if reader:
             reader.close()
@@ -60,21 +76,12 @@ def parse_command_line(argv):
     :return:
     """
     dbfile = None
-    try:
-        opts, args = getopt.getopt(argv, "f:")
-    except getopt.GetoptError as e:
-        raise LookupException("Error parsing command line") from e
-
-    for opt, arg in opts:
-        if opt == "-f":
-            dbfile = arg
-        else:
-            raise LookupException("Unknown command line argument")
-
-    if len(args) == 0:
-        raise LookupException("No address given on command line")
-    return dbfile, args[0]
-
+    parser = argparse.ArgumentParser(description='Get the country code from an IP address')
+    parser.add_argument('-f', dest='dbfile', required=True, help="Path to the GeoIP2 database file")
+    parser.add_argument('address', help="The IP address to check")
+    args = parser.parse_args()
+    
+    return args.dbfile, args.address
 
 def main(argv):
     """
@@ -83,14 +90,18 @@ def main(argv):
     :param argv: Format: "-f /path/to/database.mmdb ip.v4.add.ress"
     :return:
     """
-    (dbfile, ipaddress) = parse_command_line(argv)
-    code = get_county_code(ipaddress, dbfile)
-    print(code)
+    try:
+        (dbfile, ipaddress) = parse_command_line(argv)
+        code = get_county_code(ipaddress, dbfile)
+        print(code)
+    except LookupException as e:
+        print(e.args, file=sys.stderr)
+        print("Unknown")
 
 
 if __name__ == '__main__':
     try:
         main(sys.argv[1:])
     except BaseException as e:
-        print("Usage: geoip-lookup.py -f /path/to/geoip2-database.mmdb 192.168.1.1", file=sys.stderr)
+        print("Unknown")
         raise e